As with any project, reconstructing a classic GM truck from the postwar era starts from the ground up. TCI Engineering will lay the foundation right with its new stepped rail 1947-54 truck chassis, complete with fully boxed frame rails, air bag suspension, 31-spline axles, Currie 9-inch rear housing, and much more.
Official Release:
Introducing The NEW Total Cost Involved Engineering Stepped Rail 1947-1954 Chevy & GMC Truck Chassis. If you are looking for a complete chassis that will lay running broads, have a slammed stance and a Lowrider look – Here you go. This truck chassis was engineered to drop the vehicle stance down almost to the ground. Truck stance depends on the style of air bag set up, coil-over set up, wheel and tire size combination. This truck chassis was engineered with 2”x 8” fully boxed frame rails and a rigid X Member design for more strength and durability. With this chassis you will receive 6 bolt-on running board brackets, cab mounts and front body mounts. This complete truck chassis includes an Complete Fully boxed 2”x 8” frame with center section X-Member and all crossmembers installed, Rear Stepped Rails, 6 Bolt-on Running Board Brackets, Complete Air Bag Front End Suspension, Front Sway Bar, Complete Air Bag Rear Suspension, Power or Manual Rack, Rear Sway Bar, Complete Brand New 9“ Currie housing with your choice of gear set (Call for Details), 31 Spline Axles, Under floor pedal assembly with master cylinder and booster (pedal bracket welded to chassis), Fully plumbed custom steel brake lines complete with Wilwood residual check valves & proportioning valve, Complete Front 11” GM Disc Brakes, Complete Rear 11” Drum Brakes, and Stainless braided brake hoses. Available for: Small Block, Big Block and LS engine brackets mounted, and Transmission crossmember mounted. Options available call for details. Cruise your ride with convenience; enjoy your lowered stance, proven engineering, performance, handling, braking and Lowrider Style. Let Total Cost Involved supply you with your new Lowrider Classic Truck Chassis.
Features:
- 2×8-inch fully boxed frame rails
- Complete air bag suspension, front and rear
- SBC, BBC, and LS engine mounts are available